have two new Pitco 40D fryers on a concession trailer. One fryer i was able to get started. I had it set for 350 degrees and after about 30 minutes it shut off and I couldn’t get it started again. The pilot would light but no matter how long I held the pilot switch in for it would go out when I released it. The second fryer I was able to get the pilot lit but could never get the fryer to start. The trailer was on a little bit of a slope so the fryers weren’t completely level. Any ideas what the problem might be?
i’m running 2 100lb propane tanks. I also have a 36” griddle that was running and was using a stove burner or 2. I did also try getting them going with the stove completely shut off.