What are the steps to calibrate an imperial ir-6 36014 thermostat
I'm not familiar with that particular thermostat, but from seeing a picture of it - it doesn't appear to be one which you can calibrate.
FWIW - SIT controls (used by Garland) is another which can't be calibrated.
I suggest that you contact Imperial Range for more information. As a technician, that's what I'd do:
Contact Imperial Commercial Cooking Equipment
That's a Teddington control. Not a easy calibrator. Check for the bulb and cap tubing to be properly mounted, and not crimped or crushed before even attempting any change. They are not like a BJ and do float with load. If off 50 degrees or more, just replace it. They do drift from off to on burner a considerable amount. Make sure to place a load in when testing. Hotel pan 1/2 full of water works well.
Retrieving data ...