I want to remove the burners for deep cleaning the unit and they can't be pulled rearward away from the gas valve assembly. I can't see any screws etc attached to the burner assembly. Please help, thanks
Starting with the single, You have to lift the rear of the burner from the support slots and slide it to the rear off the gas nozzle. There may still be the shipping screws in the back that were not removed.
I forgot, some times the grease and carbon build up over the slots in the rear that align the burners. If you take a 3/16 or 1/4 flat blade screwdriver and gently pust in under the rear end of the burner slightly before the bend, then turn it the burner will break loose. Be carefull to do both sides evenly so as not to bend the burner.
These are the manuals for that unit
Retrieving data ...