I want to replace the safety rod on the robot coupe bowl. how is it done?
If you have the kit, look at the rectangular cap that goes on the bottom of the bowl. On the sides you will see two raised pins. They are what lock it in place. By taking 2 thin blade screw divers and pushing inward and up you can remove the retainer, spring, and rod. Note what color the retainer is. Clear or gray. The clear one breaks easily. Both need to be replaced when removed. They can be found here;
Robot Coupe R2N Rods, Shafts & Pins | Parts Town
On a side, there are several models of R2. . R2N, R2N ultra, R2 Dice, and R2 Ultra Dice Make sure you have the right one as the rods are slightly different.
Retrieving data ...