T&S Faucet with Sprayer for a 4 compartment sink, the double swing arm is stripped so pops out of assembly and we cant fill the different compartments. Looking for the swing arm
how about this? http://www.partstown.com/t&s_brass/ts002848-40;sid=RKM2PBWnDrkzPExp-fMAMr1nJ-BnEbNDKwA=
Or if you just need the 12 inch back section this http://www.partstown.com/t&s_brass/ts002871-40;sid=RKM2PBWnDrkzPExp-fMAMr1nJ-BnEbNDKwA=
You should be aware, that T&S never made that stem for a sink installation, but as a pot filler. Which gets less abuse. Someone combined the pot filler with a sink faucet to get you this. Is it 18 inch? overall or did they use a longer end section that is beyond the design capability of the faucet?They did have a deck faucet that was a 24 inch overall with double swing. http://download.partstown.com/is-bin/intershop.static/WFS/Reedy-PartsTown-Site/-/en_US/manuals/TS-B-0298_pm.pdf
Most 4 basin sinks used 2 faucets. One behind 1 and 2, a second behind 3 and 4. with a 10 to 12 inch arm.
What is stripped, the arm nut or the base faucet? Or both?
I don't know. Looking at the length of the plastic cart he perched it on, I was thinking it might be the 069X. Yet, I'm not so sure it isn't a Big-Flo variation.
Nonetheless, I didn't respond and was going to leave this for partstownjohn to sort out with him (or her). After all, I don't work for PartsTOWN:
For the OP (r...whatever),
Here's T&S Brass' general catalog:
The chart pictured above is on page ACS3. A Big-Flo variation of the double-joint nozzle is on page ACS6.
How can you tell the difference? WELL, off the top of my head - the only dimension I can offer is by taking a measurement of the faucet seat that your nozzle came from.
I don't know why I can't just snip, copy and paste a photo here anymore. It used to be that simple.
Now I gotta snip, copy, make a file on my computer, hit the photo icon, browse, find it, then upload what I'd snipped.
Hmm. I've always used snippets but can just copy/paste after making the snippet. I'll look into that.
As to OPs problem, yes, measurements would be helpful, as all the pot fillers really look the same.
John B (Parts Town Admin) wrote: Hmm. I've always used snippets but can just copy/paste after making the snippet. I'll look into that.
John B (Parts Town Admin) wrote:
Thanks John, but I figured it out. It was the web browser I was using. My new computer led me to try out Microsoft Edge. However, I found that when using that I couldn't copy & paste TEXT here - much less a snipped image.
As of last night, I'm back to using Mozilla Firefox. Problem solved.
Retrieving data ...