door is 30 x 70. inside of cooler is 64 x 54 x 70. we need a door gasket
When shopping for walk-in cooler door gaskets, measurements and gasket styles are subjective, which leads to infinite possibilities. How you measured the gasket might be different from how I would...or how the manufacturer specifies it. Dart-to-dart or by the gasket's outside dimensions?
Same with cooler dimensions. Inside or outside?
FWIW: I'm a technician. But up until now, I didn't even know Perlick made walk-in coolers. I researched that and it appears that they make TWO sizes:
Most walk-in cooler manufacturers put a sticker inside somewhere on the wall surrounding the door to identify its "build". Make sure there isn't one there being blocked by a shelf or product.
If you still can't find that, I suggest contacting Perlick the old fashion way - by calling them on the phone at
You will need the serial number of the unit to get anything out of Perlick. Check on top with the condenser unit for a builders tag. You may have to pull the top cover off. Some are hinged.
could this gasket possibly be 29 1/4 X 60?
26-024 GASKET, 29-1/4" X 60"
It's the only thing I can find under Perilick even close. 3/8 magnet width and 11/16 height edge mount. This one is used on their 6 and 10 keg coolers
The only other walk in door gasket is
Retrieving data ...