The ice doesn't not falling down by it self, what I should do with that?
See the manual here and page C16 specifically: http://www.iceomatic.com/uploadedFiles/Shared_Content/Product_Content/Downloads/Service_Manuals/ECP500%20Service%20Manua… Please let us know what the issue was.
If its anything like Scotsman units which it probably is, there a multiple things.
There should be a harvest assist mechanism which in essence is a rod that pushes on the ice. IT could also be its not detecting that its ready to harvest which would be due to the harvest sensor being corroded, disconnected or covered in scale. IF you open the machine and are looking at the insides, you will notice the evaporator where the ice forms, there is alittle piece of stainless on a hinged piece of plastic with a wire coming out of it, that's the sensor.
IT can happen that they loose conductivity due to scale or other things in which case, it won't realize its ready to harvest and the harvest assist mechanism won't engage, pushing the ice off the evaporator.
So what you want to check first is that harvest sensor, in most cases that's what it is, if the harvest assist mechanism is dead, well, you will probably know if its dead once you look inside because the one I had to change, pretty much had an internal explosion and was charred.
Let us know,
With the incomplete model number I can't tell what we have, But I believe it to be a under counter 180 lb dice machine made for 50 cycle. Not north America. But without the letter we have no idea of design or control.
Looking at Ice-O-Matics Model and Serial Number Format:ICE0250HA5ICE (assumed): slab ice cuber, stainless steel cabinet
025: Approximate 24-hour ice production is 250 lb
H: half diceA: air cooled
5: (assumed) the fifth version of this model?
The only references I have seen to 0250HA5 on the web are the ICE series, though that doesn't guarantee it, at least this could be used as a jump off point.
In the earlier models that would be different. 200 lb or 2000 depending on the letters before it. the 5 would be 50 cycle and the ha the same. I 'll wait till he tells us the rest of it.
If its a brand new unit, ICE 0 MATIC tapes the flap closed , make sure its not taped closed
Haha, that would be awesome.
Reminds me of when I first purchased a house-- furnace wouldn't work on a really cold day (never is a warm day, is it?). I was rather concerned as it was an old furnace: oil burner from the 50s converted to gas which I thought for sure had finally kicked the bucket (since been replaced). Called the service company, tech came out, inspected it, everything looked in order. Checked my newly installed digital thermostat... changed the batteries, boom, thing turned back on. I never felt so silly in my whole life. He didn't even charge me, and earned a loyal customer for life.
of course its a guest account so chances of him reading our recommendations are ........?
Retrieving data ...