I have a MST-=72 and it is not getting cold enough it is staying at 57 degrees'. I also have the dale turned all the way and still no changes. what parts would need to be replaced to achieve a cooler temp.? or any other suggestions?
Guest wrote:what parts would need to be replaced to achieve a cooler temp.?
what parts would need to be replaced to achieve a cooler temp.?
Well, once a visual inspection and functional tests are performed...and then followed up by employing suitable troubleshooting tools such a multimeter and/or manifold gauges in order to narrow down to which specific part(s) or component(s) is(are) at fault - then replace THAT(THOSE).
Guest wrote:or any other suggestions?
or any other suggestions?
If you lack the skills and tools to diagnose the problem, then call a qualified technician.
I have a turbo air, what should I replace?
You should replace the turbo air with a new cooler.
I do not agree with this. Turbo air is a very easy unit to work on. Seems some manufacturers add more bells and whistles than needed.
Sounds like low charge, dirty coil, bad evap fan... service tech is a pretty good idea. Clean your coils and allow it to sit 24hrs turned off, make sure the evap is not frozen. The start from scratch. Amp draw of compressor compared to date tag will help a little... higher than working to hard lower than possible low charge.
Retrieving data ...